Jolly Grip Instructions

Welcome to Jolly Grip

Follow these simple steps to achieve the strongest bond and best performance with your Jolly Grip discs.

What’s Included

✔ 3 pairs of Jolly Grip discs
✔ Contact adhesive
✔ Sandpaper

Step 1 – Prepare Your Shoes

Brush the suede sole thoroughly to remove dirt and loose fibres.

Position the Jolly Grip™ disc where you want it to sit and lightly draw around it with a pencil.

💡 Tip: Ensure the disc sits flat and does not overlap the edge of the suede sole.

Step 2 – Prepare the Surface

Lightly sand the marked area using the supplied sandpaper.

This creates the best surface for bonding.

Step 3 – First Coat of Adhesive

Apply a thin, even coat of adhesive to:

• The marked area on the suede sole
• The flat side of the Jolly Grip™ disc

Leave for 30 minutes.

Step 4 – Second Coat

Apply a second thin coat to both surfaces.

Leave for 10 minutes.

💡 Tip: For the strongest bond, gently warm both surfaces with a hairdryer for 5–10 seconds before joining.

Step 5 – Apply the Disc

Carefully position the disc inside the pencil outline.

Press firmly over the entire surface.

Step 6 – Cure Time

Leave for at least 90 minutes before using your shoes.

For maximum bond strength, leaving them overnight is recommended.

Need Help?

If you have any questions, please contact us via The Jolly Gifts website.

Thank you for supporting our small UK business.